SAE規格 J3161/1A, 2022: Vehicle Level Validation Test Procedures for V2V Safety Communications
※当ウェブ・ショップに掲載のない規格につきましては、別途お問合せ下さいませ。
※掲載の規格は、当ウェブ・ショップに掲載時点で確認できた最新版でございます。 最新の発行状況につきましては受注時に改めて確認をさせて頂きますので予めご了承下さい。
Description
This document provides vehicle-level data collection, data analysis, and data verification procedures that may be used to verify that an instrument under test (IUT) satisfies the vehicle-level requirements specified in SAE J3161/1. For the purposes of this report, “vehicle-level requirements” primarily consist of those requirements which can be verified external to the vehicle. The IUT for these procedures is a configured LTE-V2X vehicle-to-vehicle (V2V) device as defined in SAE J3161/1 and is installed on a light vehicle① or public safety vehicle②. While the IUT is conceptually separated from the vehicle it is installed on, the tests outlined in this document are primarily vehicle-level so the terms “vehicle” and “IUT” can generally be considered interchangeable. Additionally, non-vehicle-level complimentary tests, not included in this document, are required to verify that the entire set of requirements specified in SAE J3161/1 is satisfied.
NOTE: Aside from the vehicle-level data collection, data analysis, and data verification procedures that are in common between light vehicle and public safety vehicle, this document provides some vehicle-level data collection, data analysis, and data verification procedures which are exclusive for public safety vehicles (see Appendix A).
This document also includes a Traceability Matrix to provide traceability between SAE J3161/1 sections and the test procedures. This can be used to ensure thoroughness of testing coverage. The traceability matrix in Section 7 correlates test procedures from this document with the sections in SAE J3161/1 being tested.
The SAE J3161/1 sections that are addressed in this document are indicated in Table 1. SAE J3161/1 major section numbers that are indicated as N/A do not contain any requirements (subsections may include requirements). Sections that are not in scope, such as standards profiles, are expected to be tested and verified as part of device-level certification, done prior to the vehicle-level testing described in this document.
Purpose
The purpose of this document is to provide a set of vehicle-level validation test and data verification procedures that may be run to confirm the over-the-air interoperability of an IUT which has been developed to meet the SAE J3161/1 requirements.
① A class 2 or class 3 vehicle as defined by FHWA.
② A class 2, 3, or 5 police, fire, and ambulance vehicles, as defined by FHWA.