UL規格 1740, 4th Edition, 2018: UL Standard for Safety Robots and Robotic Equipment

UL規格 1740, 4th Edition, 2018

産業規格・仕様書  >  UL  > 




UL規格 1740, 4th Edition, 2018

136,180(税込)

数量

書名

UL 1740, 4th Edition, 2018: UL Standard for Safety Robots and Robotic Equipment
(Includes all amendments and changes through Revision Page(s) , August 11, 2023)
UL規格 1740, 第4版, 2018: 安全なロボットとロボット機器のためのUL規格
発行元 UL
発行年/月 2023年8月
装丁 ペーパー
ページ数 105 ページ
発送予定 海外倉庫よりお取り寄せ 1-2週間以内に発送します
※当ウェブ・ショップに掲載のない規格につきましては、別途お問合せ下さいませ。
※掲載の規格は、当ウェブ・ショップに掲載時点で確認できた最新版でございます。
最新の発行状況につきましては受注時に改めて確認をさせて頂きますので予めご了承下さい。

  
 

Description

These requirements cover robots and robotic equipment rated 600 V or less and intended for installation in accordance with the National Electrical Code, NFPA 70. Equipment evaluated to these requirements is intended to meet the requirements of Robots and Robotic Devices - Safety Requirements for Industrial Robots - Part 1, ISO 10218-1, and can be installed in accordance with ISO 10218-1, Robots and Robotic Devices - Safety Requirements for Industrial Robots - Part 1 and ISO 10218-2, Robots and Robotic Devices - Safety Requirements for Industrial Robots - Part 2: Robot Systems and Integration.

These requirements cover robotic equipment and systems intended for indoor and outdoor use in applications such as parts assembly, parts transfer, automated material handling, inspection, loading, diecasting, deburring, welding, paint spraying, automated storage/retrieval systems, and the like.

Robots and robotic equipment that contain unique features or functions associated with the application or end-product equipment, and not specifically addressed in this standard or referenced standards, shall also be evaluated to the applicable requirements of standards for the application or endproduct equipment.

In addition to the requirements in this standard, robots and robotic systems shall also comply with the applicable sections of the Electrical Standard for Industrial Machinery, NFPA 79.

Robots and robotic systems intended for use in hazardous locations, as defined by the National Electrical Code, NFPA 70, shall also comply with the applicable safety requirements based on the specific end-use application, including those contained in the following standards:
a) Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations, UL 913;
b) Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations, UL 1203;
c) Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations, ISA 12.12.01;
d) Electric Motors and Generators for Use in Hazardous (Classified) Locations, UL 674; and
e) Purged and Pressurized Enclosures for Electrical Equipment, NFPA 496.

In the following text, a requirement that applies to one type of equipment, such as a controller or pendant, will be identified by a specific reference. In the absence of a specific reference or if the term robot or robotic equipment is employed, it is to be understood that the requirement applies to all types of equipment covered by this standard.