UL規格 1004-1, 2nd Edition, 2012: UL Standard for Safety Rotating Electrical Machines - General Requirements

UL規格 1004-1, 2nd Edition, 2012

産業規格・仕様書  >  UL  > 




UL規格 1004-1, 2nd Edition, 2012

136,180(税込)

数量

書名

UL 1004-1, 2nd Edition, 2012: UL Standard for Safety Rotating Electrical Machines - General Requirements
(Includes all amendments and changes through Revision Page(s) , November 5, 2020)
UL規格 1004-1, 第2版, 2012: 回転電気機械の安全に関するUL規格 - 一般要求事項
発行元 UL
発行年/月 2020年11月   
装丁 ペーパー
ページ数 84 ページ
発送予定 海外倉庫よりお取り寄せ 1-2週間以内に発送します
※当ウェブ・ショップに掲載のない規格につきましては、別途お問合せ下さいませ。
※掲載の規格は、当ウェブ・ショップに掲載時点で確認できた最新版でございます。
最新の発行状況につきましては受注時に改めて確認をさせて頂きますので予めご了承下さい。

  
 

Description

This Standard applies to form wound rotating electrical machines rated less than 460 volts and all other rotating electrical machines and linear motors, both AC and DC, rated 1,000 volts or less.

This Standard is used to evaluate both motors intended to be field installed as well as those intended to be factory installed. Motors intended to be factory installed need not comply with the requirements in Section 12, Ventilation Openings; Section 13, Accessibility of Uninsulated Live Parts, Film-Coated Wire, and Moving Parts; 16.9 ? 16.16, 16.28, 18.1 ? 18.5, 33.1 ? 33.3, 33.5 ? 33.7, and 34.1.

For the purposes of this Standard, the term “machine” is representative of and equivalent to the terms rotating electrical machine and rotating machine, and is understood to mean all manner of electric motors and generators covered by the scope of this Standard. The term “machine” is understood to apply to both AC and DC machines.

These requirements do not cover machines intended for use in hazardous locations as defined in the National Electrical CodeR, NFPA 70.

The National Electrical CodeR and NECR are registered trademarks of the National Fire Protection Association, Inc., Quincy, MA 02169

These requirements do not cover sealed (hermetic type) motor-compressor parts, which are evaluated under the Standard for Household and Similar Electrical Appliances ? Safety ? Part 2-34: Particular Requirements for Motor-Compressors, UL 60335-2-34.

If the risk of fire does not exist at a machine, part, or circuit, then the requirements of this Standard and associated parts of this Standard, intended to address the risk of fire shall not apply to that machine, part, or circuit.

If the risk of electric shock does not exist at a machine, part, or circuit, then the requirements of this Standard and associated parts of this Standard, intended to address the risk of electric shock shall not apply to that machine, part, or circuit.

The requirements of this Standard and associated parts of this Standard, intended to address the risk of fire do not apply to a motor provided with a metal enclosure in which there are no openings in the enclosure through which molten metal, burning insulation, flaming particles, or other ignited material could fall onto flammable material, or through which a flame could be projected.